Va National Cad Standard Application Guide

document icon

VHA National CAD Standard Application Guide

VHA NATIONAL CAD STANDARD APPLICATION GUIDE May 2006 3 4.4 Amendments to CSI Module 1, Drawing Set Organization VHA Program Guide PG-18-3, Topic 2, Drawings, lists discipline classifications. This National CAD Standard (NCS) Application Guide supersedes PG-18-3, Section 6 of Topic 2, Identification of Drawings. The following table maps the ...

document icon

PG 18-3 Design and Construction Procedures

National CAD Standard as amended by VA Application Guide. 3. SIZE AND SCALE: Use minimum lettering height of 3 mm (1/8 in.). Computergenerated or - typewritten notes are preferable to hand lettered. Hold screening, shading, crosshatching and other indications of materials or locations to a minimum. Place symbols and lettering so that

document icon

VA BIM STANDARD - Veterans Affairs

Management (CFM) published the VHA National CAD Standard Application Guide (“Application Guide”) in May 2006 and therein adopted the United States National CAD Standard® (NCS), amending portions of the NCS for specific VA needs. At the time of the Application Guide’s publishing, the NCS was in version 3.1. Over the past 8 years much has ...

document icon

VA Medical Center Projects - Veterans Affairs

with professional standard practices and VA criteria. Each A/E discipline shall receive a copy of their respective VA design manuals, standard details, construction standards, and VA National CAD Standard Application Guide. The AE is responsible for obtaining the NCS.

document icon

A/E Checklist - Electrical - Whole Building Design Guide

A/E REVIEW CHECKLIST . ELECTRICAL Reviewers should - Use Checklists when reviewing any type of VA construction project for the following disciplines: • Site and Landscape, • Architectural, • Structural, • Plumbing, Fire Protection, and Sanitary, • Heating, Ventilating, and Air Conditioning (HVAC), • Steam Generation, • Steam Distribution, • Incineration/Solid Waste, and ...

document icon

Electrical Design Manual - Veterans Affairs

chapter 1: general requirements . 1.1 purpose (1)

document icon

SMACNA CAD STANDARD

SMACNA CAD Standard Second Edition v NOTICE TO USERS OF THIS PUBLICATION 1. DISCLAIMER OF WARRANTIES a) The Sheet Metal and Air Conditioning Contractor’s National Association (“SMACNA”) provides its product for informational

document icon

1 GUIDE D’UTILISATION DU SERVICE WMS

1 GUIDE D’UTILISATION DU SERVICE WMS 1.1 Son intérêt La directive européenne 2007/2/CE du 14 mars 2007, dite directive « Inspire » vise à établir une infrastructure d’information géographique dans la Communauté européenne pour favoriser la protection de l’environnement. Par « infrastructure d’information géographique », il convient d’entendre un ensemble de services d ...

document icon

Module 4 - Drafting Conventions - National CAD Standard

Also, identify standard details to be retrieved from the firm's standard details library, reduce to 1/4-size, and paste on their respective sheets. Refer to UDS Figures 4.4.1-1 and 4.4.1-2. Module 4 - Drafting Conventions 4.4 MOCK-UP DRAWING SET. UDS Figure 4.4.1-1 Mock-up of a plan sheet. UDS Figure 4.4.1-2 Mock-up of a detail sheet. 4.4.1.1Mock-Up Guidelines The following items should be ...

document icon

Module 1 - Drawing Set Organization - National CAD Standard

Standard Sheet Identification The sheet identification format is applicable to both manual and CAD drawing production. It is consistent, yet flexible enough for a wide range of project scopes. The UDS sheet identification format depicted here includes the following components: the discipline designator, consisting of one alphabetical character and a hyphen or two alphabetical characters ...